Concrete Driveway Cost Calculator
Enter your driveway's size and a price per square foot to estimate the total cost, with a typical range to sanity-check quotes.
Concrete driveways are usually priced by the square foot. A plain broom-finished slab is at the lower end, while colored, stamped or thicker reinforced concrete costs more. The typical range is about $6 to $10 per square foot installed.
How to estimate concrete driveway cost
Multiply the driveway area by the installed price per square foot. Get a couple of local quotes, then use the range below to see if they're reasonable.
Area = Length × Width
Cost = Area × Price per square foot
Cost = Area × Price per square foot
| Finish | Typical price / sq ft |
|---|---|
| Plain / broom finish | $5 – $8 |
| Colored or exposed aggregate | $8 – $12 |
| Stamped / decorative | $12 – $18 |
Worked example
A 20 ft × 20 ft driveway at $8 per square foot:
| Area = 20 × 20 | 400 sq ft |
| Cost = 400 × $8 | $3,200 |
| Typical range ($6–$10) | $2,400 – $4,000 |
Frequently asked questions
How much does a concrete driveway cost?
Most plain concrete driveways run about $6–$10 per square foot installed, so a typical 400 sq ft driveway is roughly $2,400–$4,000. Decorative finishes cost more.
What's included in the price per square foot?
Usually the concrete, labor, basic grading and a standard 4-inch slab. Extras like heavy reinforcement, removal of an old driveway, or difficult access add cost.
Is concrete cheaper than asphalt or pavers?
Concrete usually costs more than asphalt up front but less than pavers, and it tends to last longer with little maintenance.
Related calculators
A planning estimate only. Real quotes vary with region, slab thickness, reinforcement, site prep and demolition. Get local quotes before budgeting.